• made in china Backstop Clutch RSBW20 ~ RSBW90 with good quality RSBW40,RSBW45,RSBW50,RSBW55

Type RSBW is a DC sprag type freewheel. It is self-contained,  centered by plain bearings for  low rotational speeds and sealed using shield protected Outer Rings.

Unit is delivered grease lubricated ready for installation in either a horizontal or vertical position. 

Primarily used as a backstop, this type provides a high torque capacity with a minimum space

requirement.
The design allows installation in difficult environments such as high humidity or water splash areas.

A bolt, secured to a fixed part of the machine and passing through the slot in the torque arm, 

provides the rotational stop. Radial clearance on this bolt should be equal to 1-3 % of the slot 

width. The torque arm and the bearings must not be prestressed.

 


TypeSize Overrun
speed
 Weight
RSBWdH7TKN1)nimaxDL 1FEBNLbH11 
[mm][Nm][min-1][mm][mm][mm][mm][mm][mm][mm][mm][kg]
2037540010635113102.5403515182
2560640010648113102.5403515182.6
3060640010648113102.5403515182.5
35M37540010635113102.5403515182
3560640010648113102.5403515182.4
40129530013252125115603515184.6
45129530013252125115603515184.5
50129530013252125115603515184.5
55129530013252125115603515184.4
60255025016154140130703515186.5
70255025016154140130703515186.4
80487520019070165150704520259.9
90487520019070165150704520259.8

 

 


made in china Backstop Clutch RSBW20 ~ RSBW90 with good quality RSBW40,RSBW45,RSBW50,RSBW55

  • $28.00